Effect of combustibles on the structural properties of LaFeO3 synthesized by auto-combustion
Résumé
Lanthanum ferrite, LaFeO3, is a perovskite type material with an orthorhombic structure that was synthesized by auto-combustion of different fuels from where we have obtained the structure (in the presence of amine group no further calcination was needed). This perovskite structure was confirmed by : XRD, Infra-red spectroscopy (IR), UV-visible spectroscpy and laser particle size.
Key Words : LaFeO3, perovskite, auto-combustion, XRD, IR, UV-visible and laser particle size.
Références
[1] R.M. Hazen, "Perovskites", Sci. Am. 258, 74 (1988).
[2] T. Yagi, H.K. Mao, P.M. Bell, Phys. Chem. Miner. 3, 97 (1978).
[3] A. S. Bhalla, R. Guo and R. Roy, The perovskite structure - A review of its role in ceramic science and technology, Materials Research Innovations 4 (2000) 3-26.
[4] C. Li, K. C. K. Soh and P. Wu, Formability of ABO3 perovskites, Journal of Alloys and Compounds 372 (2004) 40-48.
[5] Z. Yang, Y. Huang, B. Dong, H.-L. Li, Appl. Phys. A 10 (2005).
[6] Wenjun Zheng, Ronghou Liu, Dingkun Peng, Guangyao Meng, Mater. Lett. 43 (2000) 19.
[7] Parida KM, Reddy KH, Martha S, Das DP, Biswal N (2010) Fabrication of nanocrystalline LaFeO3 : An efficient sol gel auto-combustion assisted visible light responsive photocatalyst for water decomposition. Int J Hyd Energy 35: 12161-12168.
[8] Su H, Jing L, Shi K, Yao C, Fu H (2010) Synthesis of large surface area LaFeO3
nanoparticles by SBA-16 template method as high active visible photocatalysts. J Nanopart Res 12: 967-974.
[9] S. Miyoshi, S. Onuma, A. Kaimai, H. Matsumoto, K. Yashiro, T. Kawada, J. Mizusaki, H. Yokokawa, J. Sol. St. Chem. 177 (2004) 4112.
[10] Nakayama S (2001) LaFeO3 perovskite-type oxide prepared by oxide-mixing, coprecipitation and complex synthesis methods. J Mater Sci 36: 5643-5648.
[11] Li X, Zhang H, Zhao M (1994) Preparation of nanocrystalline LaFeO3 using reverse drop coprecipitation with polyvinyl alcohol as protecting agent. Mater Chem Phys 37: 132-135.
[12] Popa M, Frantti J, Kakihana M (2002) Lanthanum ferrite LaFeO3+d nanopowders
obtained by the polymerizable complex method. Solid State Ionics 154-155: 437-445.
[13] Wang JB, Liu QF, Xue DS, Li FS (2002) Synthesis and characterization of LaFeO3 nano particles. J Matter Sci Lett 21: 1059-1062.
[14] Chick L., Pederson L., Maupin G., Bates J., Thomas L., Exarhos G. Materials Letters, 1990. 10(1-2), p. 6
[15] Y.Wang, J.Zhu, L.Zhang, X.Yang, L.Lu, X.Wang, Preparation and characterization of perovskite LaFeO3 nanocrystals, Materials Chemistry Laboratory, Nanjing University of Science and Technology, Nanjing 210094, China, 2006.
[2] T. Yagi, H.K. Mao, P.M. Bell, Phys. Chem. Miner. 3, 97 (1978).
[3] A. S. Bhalla, R. Guo and R. Roy, The perovskite structure - A review of its role in ceramic science and technology, Materials Research Innovations 4 (2000) 3-26.
[4] C. Li, K. C. K. Soh and P. Wu, Formability of ABO3 perovskites, Journal of Alloys and Compounds 372 (2004) 40-48.
[5] Z. Yang, Y. Huang, B. Dong, H.-L. Li, Appl. Phys. A 10 (2005).
[6] Wenjun Zheng, Ronghou Liu, Dingkun Peng, Guangyao Meng, Mater. Lett. 43 (2000) 19.
[7] Parida KM, Reddy KH, Martha S, Das DP, Biswal N (2010) Fabrication of nanocrystalline LaFeO3 : An efficient sol gel auto-combustion assisted visible light responsive photocatalyst for water decomposition. Int J Hyd Energy 35: 12161-12168.
[8] Su H, Jing L, Shi K, Yao C, Fu H (2010) Synthesis of large surface area LaFeO3
nanoparticles by SBA-16 template method as high active visible photocatalysts. J Nanopart Res 12: 967-974.
[9] S. Miyoshi, S. Onuma, A. Kaimai, H. Matsumoto, K. Yashiro, T. Kawada, J. Mizusaki, H. Yokokawa, J. Sol. St. Chem. 177 (2004) 4112.
[10] Nakayama S (2001) LaFeO3 perovskite-type oxide prepared by oxide-mixing, coprecipitation and complex synthesis methods. J Mater Sci 36: 5643-5648.
[11] Li X, Zhang H, Zhao M (1994) Preparation of nanocrystalline LaFeO3 using reverse drop coprecipitation with polyvinyl alcohol as protecting agent. Mater Chem Phys 37: 132-135.
[12] Popa M, Frantti J, Kakihana M (2002) Lanthanum ferrite LaFeO3+d nanopowders
obtained by the polymerizable complex method. Solid State Ionics 154-155: 437-445.
[13] Wang JB, Liu QF, Xue DS, Li FS (2002) Synthesis and characterization of LaFeO3 nano particles. J Matter Sci Lett 21: 1059-1062.
[14] Chick L., Pederson L., Maupin G., Bates J., Thomas L., Exarhos G. Materials Letters, 1990. 10(1-2), p. 6
[15] Y.Wang, J.Zhu, L.Zhang, X.Yang, L.Lu, X.Wang, Preparation and characterization of perovskite LaFeO3 nanocrystals, Materials Chemistry Laboratory, Nanjing University of Science and Technology, Nanjing 210094, China, 2006.
Publiée
2016-05-10
Comment citer
HAMMOUCHE, D.; DJANI, F.; OMARI, M..
Effect of combustibles on the structural properties of LaFeO3 synthesized by auto-combustion.
Science des matériaux (Laboratoire LARHYSS), [S.l.], v. 7, n. 02, mai 2016.
ISSN 2352-9954.
Disponible à l'adresse : >https://revues.univ-biskra.dz./index.php/sdm/article/view/1532>. Date de consultation : 21 nov. 2024
Rubrique
Articles
