Editorial preface to the first volume of Journal of Applied Engineering Science & Technology
References
Baheddi, M., Y. Youb (2014) Study of the behavior of bridges under seismic loads considering soil-structure interaction. Journal of Applied Engineering Science & Technology 1(2): 71-77.
Bekki, H., B. Tali, J. Canou, J.-C. Dupla, A. Bouafia (2014) Behavior of Soil-structure interfaces under cyclic loading for large numbers of cycles: Application to piles. Journal of Applied Engineering Science & Technology 1(1): 11-16.
Delage, P. (2014) Geotechnical problems due to the collapse of unsaturated soils: the case of loess from northern France. Journal of Applied Engineering Science & Technology 1(1): 17-22.
Frank, R. (2014) Eurocode 7 on 'Geotechnical design': a code for soil-structure interaction. Journal of Applied Engineering Science & Technology 1(1): 1-10.
Khemissa, M., A. Mahamedi, L. Mekki (2015) Problematic soil mechanics in the Algerian arid and semi-arid regions: Case of M’sila expansive clays. Journal of Applied Engineering Science & Technology 1(2): 37-41.
Labed, A., A. Rouag, A. Benchabane, N. Moummi, M. Zerouali (2015) Applicability of solar desiccant cooling systems in Algerian Sahara: Experimental investigation of flat plate collectors. Journal of Applied Engineering Science & Technology 1(2): 61-69.
Messast, S., M. Hazem, N. Bousbia, H. Mokhbi (2014) Numerical modeling of the face reinforcement of Djebel El-Kantour tunnel face (highway east-west). Journal of Applied Engineering Science & Technology 1(1): 23-29.
Pereira, J.M. (2014) Time effects in geomaterials. Journal of Applied Engineering Science & Technology 1(1):31-36.
Rahmouni, O., A. Mabrouki, D. Benmeddour, M. Mellas (2015) Numerical study of geogrid-reinforced segmental earth retaining wall. Journal of Applied Engineering Science & Technology 1(2): 43-49.
Taibi, D., A. Titaouine, F. Benchabane, O. Bennis (2015) Stability analysis of the extended Kalman filter for Permanent Magnet Synchronous Motor. Journal of Applied Engineering Science & Technology 1(2): 51-60.
Triaridis, S., & Kyrgidis, A. (2010). Peer review and journal impact factor: the two pillars of contemporary medical publishing. Hippokratia, 14(Suppl 1): 5-12.
Wager, E., & Kleinert, S. (2013). Why do we need international standards on responsible research publication for authors and editors?. Journal of global health, 3(2): 1-7.
Wager E & Kleinert S (2011) Responsible research publication: international standards for authors. A position statement developed at the 2nd World Conference on Research Integrity, Singapore, July 22 - 24, 2010. Chapter 50 in: Mayer T & Steneck N (eds) Promoting Research Integrity in a Global Environment. Imperial College Press / World Scientific Publishing, Singapore (pp 309-16). (ISBN 978-981-4340-97-7)1.
Bekki, H., B. Tali, J. Canou, J.-C. Dupla, A. Bouafia (2014) Behavior of Soil-structure interfaces under cyclic loading for large numbers of cycles: Application to piles. Journal of Applied Engineering Science & Technology 1(1): 11-16.
Delage, P. (2014) Geotechnical problems due to the collapse of unsaturated soils: the case of loess from northern France. Journal of Applied Engineering Science & Technology 1(1): 17-22.
Frank, R. (2014) Eurocode 7 on 'Geotechnical design': a code for soil-structure interaction. Journal of Applied Engineering Science & Technology 1(1): 1-10.
Khemissa, M., A. Mahamedi, L. Mekki (2015) Problematic soil mechanics in the Algerian arid and semi-arid regions: Case of M’sila expansive clays. Journal of Applied Engineering Science & Technology 1(2): 37-41.
Labed, A., A. Rouag, A. Benchabane, N. Moummi, M. Zerouali (2015) Applicability of solar desiccant cooling systems in Algerian Sahara: Experimental investigation of flat plate collectors. Journal of Applied Engineering Science & Technology 1(2): 61-69.
Messast, S., M. Hazem, N. Bousbia, H. Mokhbi (2014) Numerical modeling of the face reinforcement of Djebel El-Kantour tunnel face (highway east-west). Journal of Applied Engineering Science & Technology 1(1): 23-29.
Pereira, J.M. (2014) Time effects in geomaterials. Journal of Applied Engineering Science & Technology 1(1):31-36.
Rahmouni, O., A. Mabrouki, D. Benmeddour, M. Mellas (2015) Numerical study of geogrid-reinforced segmental earth retaining wall. Journal of Applied Engineering Science & Technology 1(2): 43-49.
Taibi, D., A. Titaouine, F. Benchabane, O. Bennis (2015) Stability analysis of the extended Kalman filter for Permanent Magnet Synchronous Motor. Journal of Applied Engineering Science & Technology 1(2): 51-60.
Triaridis, S., & Kyrgidis, A. (2010). Peer review and journal impact factor: the two pillars of contemporary medical publishing. Hippokratia, 14(Suppl 1): 5-12.
Wager, E., & Kleinert, S. (2013). Why do we need international standards on responsible research publication for authors and editors?. Journal of global health, 3(2): 1-7.
Wager E & Kleinert S (2011) Responsible research publication: international standards for authors. A position statement developed at the 2nd World Conference on Research Integrity, Singapore, July 22 - 24, 2010. Chapter 50 in: Mayer T & Steneck N (eds) Promoting Research Integrity in a Global Environment. Imperial College Press / World Scientific Publishing, Singapore (pp 309-16). (ISBN 978-981-4340-97-7)1.
Published
2015-04-07
How to Cite
BENCHABANE, Adel.
Editorial preface to the first volume of Journal of Applied Engineering Science & Technology.
Journal of Applied Engineering Science & Technology, [S.l.], v. 1, n. 1, p. vii-viii, apr. 2015.
ISSN 2571-9815.
Available at: <https://revues.univ-biskra.dz./index.php/jaest/article/view/1255>. Date accessed: 23 nov. 2024.
Issue
Section
Editorial
J. Appl. Eng. Sci. Technol. (JAEST - ISSN 2352-9873) is a peer-reviewed quarterly journal dedicated to the applied engineering sciences and technology. The JAEST provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.
There is no submission or publication fee for papers published in the JAEST.
Authors who publish in the JAEST agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in the JAEST.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in the JAEST.
- Authors are permitted to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access). Any such posting made before acceptance and publication of the Work shall be updated upon publication to include a reference to the JAEST and a link to the online abstract for the final published Work in the Journal.
