NUMERICAL MODELING OF A TIMOSHENKO FGM BEAM USING THE FINITE ELEMENT METHOD

H. ZIOU Department of Civil Engineering, University of Biskra, B.P. 145, R.P. 07000, Biskra, Algeria
H. GUENFOUD LGCH Laboratory, University of 08 may 1945, Guelma, Algeria
M. HIMEUR LGCH Laboratory, University of 08 may 1945, Guelma, Algeria
M. GUENFOUD LGCH Laboratory, University of 08 may 1945, Guelma, Algeria

Résumé

In this paper, a finite element procedure for static analysis of functionally graded material (FGM) beam is presented. The material properties of the beam are assumed to vary continuously along the beam thickness by a power-law distribution. The assumed field displacements equations of the beam are represented by Euler-Bernoulli and first order shear deformation theories. A simply supported beam subjected to uniform load for different length-to-thickness ratio has been chosen. The influences of span-to-depth and the volume fraction index on the mid plane deflections, and stresses distribution along the thickness of the beam are examined. The obtained results are compared with the existing solutions to verify the validity of the developed theories

Publiée

2017-10-23

Comment citer

ZIOU, H. et al. NUMERICAL MODELING OF A TIMOSHENKO FGM BEAM USING THE FINITE ELEMENT METHOD. Courrier du Savoir, [S.l.], v. 24, oct. 2017. ISSN 1112-3338. Disponible à l'adresse : >https://revues.univ-biskra.dz./index.php/cds/article/view/2238>. Date de consultation : 14 nov. 2024

Formats de citations

Numéro

Vol. 24 (2017): COURRIER DU SAVOIR (Septembre)

Rubrique

Articles