NONLINEAR FEEDBACK APPROACH BASED ON SLIDING MODE CONTROLLER FOR AN INDUCTION MOTOR FED BY MATRIX CONVERTER
Résumé
In this paper, a nonlinear feedback linearization approach and sliding mode controller are combined to generate the reference voltages for a matrix converter controlled by DSVM strategy fed induction motor in order to preserve the robustness with respect to desired dynamic behaviors for this drive system. The transfer function and the selection approach of the parameter for the input filter are also introduced. The simulation results of the robustness testing of the drive system have been carried out to validate the advantages of the proposed control system.
Références
[1] L. Huber and D. Borojevic, "Space vector modulation three-phase to three-phase matrix converter with input power factor correction", IEEE Trans. on industry applications, vol. 31, no. 6, pp. 1234-1246, Nov/Dec. 1995.
[2] P. W. Wheeler, J. Rodrigues and J. C. Clare, “Matrix converters: Technology Review”, IEEE Trans, Ind. Electronics, vol. 49, no. 2, pp.276-288, Apr. 2002.
[3] L. Zhang, C. Watthanasarn and W. Shepherd, “Analysis and comparison of the control techniques for AC-AC matrix converters”, IEE Proc-Elect., Power Appl, vol. 145, no. 4, pp.284-294, Jul. 1998.
[4] E. Watanabe, S. Ishii, E. Yamamoto, H. Hara, J-K. Kang, and A. M. Hava, “High performance motor drive using matrix converter”, Advances in Motor Control, IEE Seminar, pp.1/7-6/7, 2000.
[5] D. Casadei, G. Serra and A. Tani, “Matrix converter modulation Strategies: A new general approach based on space-vector representation of the switch state”, IEEE Trans, Ind. Electronics, vol. 49, no. 2, pp.370-381, Apr. 2002.
[6] J. Rodriguez, E. Silva and F. Blaabjerk, “Modelling, analysis and simulation of matrix converters”, Applications, vol. IA-21, no. 6, pp. 1337-1342, Nov/Dec. 1985.
[7] S. Hongwu, L. Hua, W. Xingwei and Y. Limin,“Damped input filter design of matrix converter”, Power electronics and drive systems Proc PEDS'2009, pp.672-677, Nov 2009.
[8] V. Piriyawong, "Design and implementation of simple commutation method matrix converter", Master of science thesis King mongkut's Institute of technology, North Bangkok, Thailand, 2007.
[9] R. Marino, S. Peresada, and P. Valigi, “Adaptative input-output linearizing control of induction motors”, IEEE Trans. on Aut. Cont., vol.38, pp.208-221, 1993.
[10] L. Bekhouche, “Input-output linearizing control by Torque and flux of induction machine”, Master thesis, University of Setif, Algeria, 2009.
[11] I. Bakhti, “Different nonlinear controls of sensorless induction machine with flux and speed observers”, Master thesis, University of Batna, Algeria, 2007.
[12] A. Merabet, “nonlinear predictive control of induction motor drive”, Doctorate thesis, University of Quebec, 2007.
[13] M. Tarbouchi, “Exact linearization control of induction machine in defluxated mode”, Ph.D thesis,Laval university, Quebec, 1997.
[14] K. Sun, L. Huang, and D. Zhou, “A nonlinear robust controller for matrix converter fed induction motor drives”, IEEE Trans. on Aut. Cont., vol.38, pp.1365-1370, 2005.
[15] R. Yazdanpanah, J.Soltani, and G. R. Arab Markadeh, “Nonlinear torque and stator flux controller for induction motor drive based on adaptive input–output feedback linearization and sliding mode control”, Elsevier, Energy conversion and management, vol.49, pp.541-550, 2008.
[16] H.H. Lee, H.M. Nguyen, “Direct rotor-flux-oriented control method using matrix converter fed induction motor”, IEEE Proc, IFOST’2005, pp.309-313, Oct. 2006.
[17] J-J. E. Slotine, and W. Li, "Applied non linear control", Prentice-Hall Press, New Jersy, USA, 1991.
[2] P. W. Wheeler, J. Rodrigues and J. C. Clare, “Matrix converters: Technology Review”, IEEE Trans, Ind. Electronics, vol. 49, no. 2, pp.276-288, Apr. 2002.
[3] L. Zhang, C. Watthanasarn and W. Shepherd, “Analysis and comparison of the control techniques for AC-AC matrix converters”, IEE Proc-Elect., Power Appl, vol. 145, no. 4, pp.284-294, Jul. 1998.
[4] E. Watanabe, S. Ishii, E. Yamamoto, H. Hara, J-K. Kang, and A. M. Hava, “High performance motor drive using matrix converter”, Advances in Motor Control, IEE Seminar, pp.1/7-6/7, 2000.
[5] D. Casadei, G. Serra and A. Tani, “Matrix converter modulation Strategies: A new general approach based on space-vector representation of the switch state”, IEEE Trans, Ind. Electronics, vol. 49, no. 2, pp.370-381, Apr. 2002.
[6] J. Rodriguez, E. Silva and F. Blaabjerk, “Modelling, analysis and simulation of matrix converters”, Applications, vol. IA-21, no. 6, pp. 1337-1342, Nov/Dec. 1985.
[7] S. Hongwu, L. Hua, W. Xingwei and Y. Limin,“Damped input filter design of matrix converter”, Power electronics and drive systems Proc PEDS'2009, pp.672-677, Nov 2009.
[8] V. Piriyawong, "Design and implementation of simple commutation method matrix converter", Master of science thesis King mongkut's Institute of technology, North Bangkok, Thailand, 2007.
[9] R. Marino, S. Peresada, and P. Valigi, “Adaptative input-output linearizing control of induction motors”, IEEE Trans. on Aut. Cont., vol.38, pp.208-221, 1993.
[10] L. Bekhouche, “Input-output linearizing control by Torque and flux of induction machine”, Master thesis, University of Setif, Algeria, 2009.
[11] I. Bakhti, “Different nonlinear controls of sensorless induction machine with flux and speed observers”, Master thesis, University of Batna, Algeria, 2007.
[12] A. Merabet, “nonlinear predictive control of induction motor drive”, Doctorate thesis, University of Quebec, 2007.
[13] M. Tarbouchi, “Exact linearization control of induction machine in defluxated mode”, Ph.D thesis,Laval university, Quebec, 1997.
[14] K. Sun, L. Huang, and D. Zhou, “A nonlinear robust controller for matrix converter fed induction motor drives”, IEEE Trans. on Aut. Cont., vol.38, pp.1365-1370, 2005.
[15] R. Yazdanpanah, J.Soltani, and G. R. Arab Markadeh, “Nonlinear torque and stator flux controller for induction motor drive based on adaptive input–output feedback linearization and sliding mode control”, Elsevier, Energy conversion and management, vol.49, pp.541-550, 2008.
[16] H.H. Lee, H.M. Nguyen, “Direct rotor-flux-oriented control method using matrix converter fed induction motor”, IEEE Proc, IFOST’2005, pp.309-313, Oct. 2006.
[17] J-J. E. Slotine, and W. Li, "Applied non linear control", Prentice-Hall Press, New Jersy, USA, 1991.
Publiée
2016-01-18
Comment citer
DENDOUGA, ABDELHAKIM; ABDESSEMED, RACHID.
NONLINEAR FEEDBACK APPROACH BASED ON SLIDING MODE CONTROLLER FOR AN INDUCTION MOTOR FED BY MATRIX CONVERTER.
Courrier du Savoir, [S.l.], v. 20, jan. 2016.
ISSN 1112-3338.
Disponible à l'adresse : >https://revues.univ-biskra.dz./index.php/cds/article/view/1441>. Date de consultation : 14 nov. 2024
Rubrique
Articles
